Brush cutter usage and maintenance knowledge

With the adjustment of orchard planting patterns, orchards are generally used for dwarf planting in order to obtain greater yields. The traditional orchard weeding machinery can no longer adapt to the existing orchard planting forms. The new product brush cutter can fully meet the current orchard weeding operation needs. The use of brush cutters for weeding operations can greatly increase operational efficiency. Weeds can be kept on the surface to prevent soil erosion, beautify the environment, preserve water, and increase soil organic matter. First, the general safety measures 1, prohibit the use of indoor; 2, to maintain a safe distance from flammable items shall not be less than 1m; 3, when refueling, no smoking, must stop the engine running, prohibit gasoline spills; 4, to work with Protective mirrors and protective equipment, use shoulder straps, if it breaks, cracks and bends, do not use, do not use protective cover; 5, take away stones and other hard objects on the ground before use. Animals 1.5m or more; 6, hands and feet away from the machine before turning and stopping. Second, the inspection before operation 1, the fuel surface from the outside of the fuel tank to check the fuel surface, if the fuel surface is low, add fuel to the upper limit. The fuel is prepared with a mixture ratio of unleaded gasoline and two-stroke oil of 25-40:1. Never use pure gasoline and gasoline containing impurities. 2. The air filter inspects the dirt of the air filter element and finds dirt. Should be cleaned; 3, throttle steel cable check the throttle cable at the end of the free space, check the throttle handle operation is stable; 4, the blade inspection blade installation nut is loose, if necessary, please tighten the nut; check the blade for cracks, gaps, Bending and wear, if necessary, replace it; 5. Check the shield of the cutter head guard for looseness; if necessary, tighten the guard safety bolt; check if the guard is damaged and replace it if necessary; 6. Pull the quick release device upwards. Release the lever and check that the hook is released and place the hook in place. Third, maintenance 1, spark plug to remove the spark plug, clean up the carbon deposition, measurement (electrode) clearance between 0.6-0.7mm; 2, check the fuel filter and clean the fuel tank to pour the engine fuel, remove the filter, and light Light cleaning; remove the moisture and dirt attached to the fuel tank; 3, heat sink through the hood to check whether the heat sink is dirty, if dirty should be cleaned; 4, fuel pipe to check the fuel pipe, if the aging or oil spill should be timely Replacement; 5. Replace blade and nylon disk in time. 4. Save the fuel in the fuel tank, press the oil pump several times, then empty the fuel in the fuel tank, install the blade cover on the blade, and put the mower in a clean place.

According to the number of barrels, Piston-typed Mobile Milking Machine can be divided into two categories: Single-barrel Type and Double barrel Type.

With unique design, easy operation, easy maintenance, it can lower the utility costs. It will not hurt the nipple by milking soft with stable vacuum. The milking cup group is with a transparent tube, so the operator can observe the nipples of cows during the milking.

After years of production and constant technological improvements, the new designed milking machines can meet the actual demand for the majority of users. We discuss and improve more about the machine, to make them catch international standards, and suitable for more users in different countries. The portable Milking Machine is not only used for the individual animal in small farm, but also provides a selection for large-scale dairy farms for some special animals.

Piston-typed Milking Machine

Piston-Typed Milking Machine,Dairy Farm Milking Machine,Piston Milking Machine,Goat Milking Machine

Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com