Corn thresher installation five note

1. Flatten the equipment four feet to ensure a stable and firm. To reduce vibration.

2, using the motor as a power, we must check whether the power cord is firmly connected, tightly packed and press the ground wire.

3. Feed the corn cobs continuously and evenly, and the feeding amount should be appropriate. If it is fed intermittently, it will affect the production efficiency. Excessive feeding will cause the machine to jam and overload, resulting in burning the motor and damaging the equipment.

4. The moisture content of threshed corn cob should not exceed 20%, and the water content is too high to achieve normal threshing effect.

5. Before the work is completed, the input corn sticks are completely de-absorbed and discharged, and the air load is shut down. It is forbidden to bring the load to stop.

Demetdent announced the release of the our company`s wet/dry milling machine. It was added to the Demetdent family of Dental Milling devices in answer to our lab and dental users need for a wet-milling option to handle many of the new brands and materials. The wet/dry milling machine fills a gap in many dental restoration workflows, giving laboratories the added flexibility of milling glass ceramic, composite resin materials that are becoming increasingly popular in the industry due to their high translucency, increased flexural strength and hardness, and overall aesthetic value for inlay/onlays.

Dental Machines

Cerec Machine,Dental Machine,Dental Milling Machine,Teeth Cleaning Machine

Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com