Processed with nectarine juice

Peach juice with pulp needs to remove the air from the fruit to prevent oxidation of the juice. Homogenization is then performed in a high pressure homogenizer. Degassing vacuum is 60 ~ 80Kpa. Homogeneous pressure is controlled at 12-13Mpa. Homogeneity can improve the appearance of the liquid, making it bright color, more concentrated flavor, more alcoholic taste, reduce the delamination of the liquid.

First, the choice of peach

The production of peach juice with pulp requires the maturity of peaches to be 8 to 90%, without rot, mildew, and fruit.

Second, cleaning

The sediment and dirt on the surface are washed off, the browned part of the fruit is cut off, and the peach hair is removed by a scrubber. Finally use a washing machine to wash away debris.

Three, warm up

Its purpose is to soften the fruit and facilitate breakage and beating. Preheat temperature is about 95 °C, time 3 to 5 minutes.

Fourth, to nuclear and broken

The core was removed by a nuclear bomber and the fruit was broken. 30 to 50 mg of ascorbic acid solution may be added to prevent discoloration.

Fifth, beating

Remove peels, rough flesh and other impurities from the fruit. Make the pulp particles less than 0.5 mm.

VI. Preparation of peach juice with fruit

Contains more than 40% fruit pulp. The amount of sugar and organic acid added can be determined according to taste. General requirements of product soluble solids not less than 12%, acidity of not less than 0.35%, vitamin C25mg or more. The preparation water should meet the drinking water standards.

Seven, homogenization and degassing - an important part of processing peach juice with pulp

The air in the fruit is removed to prevent oxidation of the juice. Homogenization is then performed in a high pressure homogenizer. Degassing vacuum is 60 ~ 80Kpa. Homogeneous pressure is controlled at 12-13Mpa. Homogeneity can improve the appearance of the liquid, making it bright color, more concentrated flavor, more alcoholic taste, reduce the delamination of the liquid.

Eight, sterilization

The liquid is heated to 95°C or more by a plate heat exchanger or a Tube heater to perform filling. The temperature of the feed liquid in the filling packaging container shall not be lower than 85°C to ensure that the microbiological indicators meet the national standards.

Nine, peach juice with pulp cooling

The sealed product is cooled to below 40°C. Before the canned beverage cools, it needs to be poured for 1 to 3 minutes to kill the bacteria in the lid.

Bath chair is used during taking bath for the movement difficulties of the disabled, patients, the elderly and infirm children. The main components from the chair includes frame, seat plate. The Stand plate could withstand 100kg static load, backrest could load 45kg static load and it shall not produce permanent deformation. Because often contacting with the patient's body surface, so before using normally we have one time regular cleaning, if necessary, make disinfectant disinfection when replace the patient, keep dry and clean, no calibration. Appropriate maintenance and maintenance can extend the life of the bath chair.

 

Rehabilitation Products is our main products. We have get the CE, ISO, FDA. As a experienced company, ORIENTMED has a strong ability to help our clients to get the registration and short the delivery.

 

Any questions, welcome to contact us. Thank you!

For Health, we could do better!

 

Bath Bench

Bath Bench,Shower Chair,Shower Bench,Care Bath Bench

Hebei Orient Imp. & Exp. Co. Ltd. , https://www.orientmedcare.com