Matrix Fermentation Aid (how rice husks are fermented into a good matrix)

Matrix Fermentation Aid (how rice husks are fermented into a good matrix)
The main components of rice hull vary greatly in variety, origin, and processing method. Generally, the water content is about 12%, carbon content is 36%, nitrogen content is 0.48%, phosphorus content is 0.32%, and potassium content is 0.27%. The composition of rice straw is similar to that of rice straw, but rice husk has much higher silicic acid content than rice straw. The carbon-nitrogen ratio of rice hulls is as high as 75.6%, which is one of the organic materials that are difficult to ferment. Generally, it is difficult for the fermentation auxiliaries to “uniformize” them. Therefore, rice husk fermentation should first use urea "ammonia" treatment, or use livestock urine mixed ammoniation treatment in order to obtain a better fermentation effect.
How to operate? The first is the preparation of materials: about 1 ton of rice husks, 4 kg of urea and 10 kg of rice bran. Next, the rice husk is humidified, and 500 kg of water per ton of material is added (soaking) to make the moisture content reach 60 to 65%, and to accumulate for more than 24 hours. Then 4 kg of urea is added to 50 kg of water to make urea water and evenly sprinkled. In the rice husk stack, after 12 hours, 2 kg of Tribolium microbial fermentation aids were mixed in 10 kg rice bran, fully "diluted", and then spread evenly in the rice husk heap, the accumulation height of which did not exceed 2 m. The area is not more than 50m2; it is appropriate to cover the air-permeable cover immediately after the accumulation, so as to maintain the heat and moisture. When the fermentation temperature reaches 65-70°C and continues for 36 hours, it can be turned for the first time. Afterwards, it is turned over several times until the fermentation is completed. The "core” of management during this time is “incubation”. Under the premise of doing a good "ventilation", "moisturizing" management.

The following dimensions is: Width:750mm*Length:1500m*Thickness:25um


The 3Fagri Silage Wrap has been manufactured by Zibo Maoyang Industry and Trading CO., LTD in China, using advanced multi-layer co-extrusion blown film technology and equipment.

The silage wrap is a high performance multi-layer blown co-extruded Agricultural Stretch Film, strong and reliable. Benefiting from high tack levels, it maintains a consistent appearance both during and after wrapping. 3Fagri silage wrap is designed for trouble free when wrapping round or large square bales on a variety of forages. It can be used to preserve silage, haylage, maize and other suitable crops on all types of bale wrappers.

To make silage wrap, only 100% virgin raw materials are used. This ensures that silage wrap is more tough stretch plastic and that it wraps wider on the bale providing a better seal and giving you better quality silage.

The 3Fagri silage wrap comes with a 12-month guarantee against UV degradation, features high UV stabilization and provides an airtight and weatherproof shield, when used according to instructions.

The 3Fagri silage wrap is available in Black, Green and White.



Silage Wrap 750mm

Silage Wrap 750mm , Silage Bale Wrap,Agriculture Silage Film,Silage Stretching Wrap, Agricultural Stretch Wrap

Zibo Maoyang Industry and Trading Co.,ltd , http://www.mysilage.com