Combine harvester "closed-door cultivation" notes

Combine harvesters must do a good job of "longevity" maintenance work. The following nine points may help you succeed: 1. Rotate the engine crankshaft once a month and inject a small amount of clean oil into the cylinder; distribute the valve operating handle back and forth several times. 2. Open the water tank, body, and oil cooler drain switch of the engine, and put the cooling water: discharge the oil in the fuel tank and the oil in the oil pan; use the plastic cloth to put the air filter, exhaust nozzle, fuel tank The filling port and other parts are wrapped; an appropriate amount of clean oil is injected into the cylinder, and the plate is rotated several times by the crankshaft. 3, the main electrical components such as generators, lighting headlights, remove and wipe clean, save it separately to avoid damage. 4. Remove the battery and store it separately. Preservation method: After the battery is fully charged, pour out the electrolyte, change into distilled water, park for 6 hours, recharge for 4 hours, replace distilled water, recharge for 2 hours, then pour distilled water, and then fill with fresh distilled water. Store. 5. Combine the combine harvester with square wood to lift the front and rear tires off the ground; lower the harvesting table and pull-out wheel to the lowest position, and place it on the wood stably, so that the hydraulic system does not bear the load. 6. Add grease to each rotating bearing; apply friction or oil to the friction parts, such as cutters, clutch claws, auger extension claws, adjustment bolts, etc., to prevent corrosion; paint has worn away rusted parts and should be Derusting and repainting. 7. Completely inspect the consumables on the machine, such as auger telescopic rod sets, moving blades, friction plates, roller spikes, fixed nails, etc. If excessive wear, deformation, or damage is found, it should be repaired or replaced. 8, remove all the triangle tape, wipe clean and coated with talcum powder, tied the label, hang on the wall inside the library; remove the chain into diesel clean, coated with oil or butter, wrapped in kraft paper, put Ventilated and dry place. 9. Clean the dirt, stalks, grains and other impurities inside and outside the machine, rinse them with water, dry them, and store them in the storage room.

We mainly export European Chinese onions, garlic and ginger.

Fresh yellow onion and red onion size 60-80mm 70-90mm 90-110mm 10kg/net bag, 20kg/net bag or 25kg/net bag (2019 new crop onion)

Peeled yellow onion and red onion size 60-80mm 70-90mm 90-110mm 10kg / box, 20kg / box, filled with nitrogen, storage time of 90 days.

Frozen onion, frozen onion cube, frozen onion ring 10kg/box or 20kg/box Save for 2 years.

We also offer garlic, ginger and peeled garlic

Our onions have been sold in the Netherlands, the UK, Poland, and Italy, and the quality is very good.

Looking forward to your response, I am very happy to quote you.


WHATSAPP+8613213293300

Garlic.Ginger.onion.peeled Onion.peeled Garlic.frozen Onion Pieces

garlic.Ginger.onion.peeled onion.peeled garlic.frozen onion pieces

henan junzhian food co., ltd , https://www.junzhianfood-onion.com