1. The tightening of the connecting parts of the tractors is factory-tested, but during the repeated transfer process, the machine is inevitably loosened. For this purpose, various fasteners and fasteners should be tightened in time, especially the steering system, brake system, suspension, and wheels.
2. Check the fluid level is mainly fuel tank oil level, water tank surface, transmission and rear axle lubricant oil level, and battery electrolyte level. When it is found that the liquid level is insufficient, the liquid material should be added in time.
3. Check the engine oil should mainly check the following: (I) The amount of oil in the oil pan should be not less than the underline of the oil scale. (2) The quality of oil: If the tractor is shipped out of the factory in summer, and bought back in winter, it should be replaced with oil used in winter; vice versa. (3) The switch of the oil filter on a large tractor should be switched to the "summer" or "winter" position depending on the season or the temperature. (4) In order to prevent the oil in the oil-bath type air filter oil pan from splashing out and contaminating the vehicle capacity during the transportation process, some manufacturers add it at the end of the factory and pay attention to adding the oil after buying it.
4. Run-in is to make the new machine's rotation speed from low to high, load from small to large, through the gradual operation process, the gear, shaft and other friction surface grinding marks become more seamless. Running-in has an important effect on prolonging the service life of the parts. Do not neglect the running-in process and neglect the running-in process. Otherwise, the machine will be damaged due to minor loss.
5. Listed after the new tractor bought back. The documents such as purchase invoices, certificates of conformity, and user manuals shall be carried within 3 months, and the formalities of the household shall be handled by the agricultural machinery, levy and other departments. It is an illegal act to drive an unlicensed vehicle on the road and it is punished.
High Pressure Steam Sterilizer is a rapid and reliable sterilization and sterilizing equipment that utilizes saturated pressure steam and is suitable for medical and health undertakings,scientific research,and agriculture.Classification of high pressure Steam Sterilizer is divided into portable autoclaves,vertical pressure steam sterilizer,and horizontal high pressure steam sterilizer according to the size of the models.
Sterilization and sterilization of medical devices,dressings,glassware,and solution culture media also apply to high altitude drinking water in highland areas for cooking equipment and enterprises and institutions,as well as high temperature steam source equipment.
Steam Sterilizer
Steam Sterilizer,Automatic Steam Sterilizer,Benchtop Pulse Sterilizer,High Pressure Steam Sterilizer
Henan Sanqiang Medical Equipment Liability Co.,Ltd , http://www.sterilizers-china.com