Snail outdoor open culture

Outdoor open culture is the most economical method for large-scale breeding of snails in the southern region. It has the characteristics of low investment, simple management, large output, less disease, and high efficiency. The specific methods are as follows: I. Selection of breeding sites Select lee, damp, dark, loose soil, rich organic matter-rich foothills, sloping land or wasteland for breeding grounds, so as to facilitate the growth and reproduction of snails, and also to cover the land with less soil. A layer of organic-rich humus or sand is used for culture. The soil moisture is controlled at 30% - 40%, and some gypsum powder or eggshell powder, bone meal, etc. are sprinkled on the soil to supplement calcium. The breeding area also needs to be easily drained during the rainy season. Second, the source of feed Planting dandelion, lettuce, vegetables, carrots, ramie, sweet potatoes and Other plants in the breeding ground so that the snails feed on their own. At the same time also need to feed the right amount of melon, peel and concentrate feed. Concentrate feeding is the mixing of wheat bran, cornmeal, potato, yeast powder and eggshell powder into a paste. Spread it on the leaves of the cabbage and put it in the breeding ground. Let the snail feed freely or put the concentrate on food. The slot is for snails. Third, anti-escape will be 60 cm high nylon net, plastic window sand in the lower extension of the farm around buried in the upper part of the continuous bending into two right angles, the formation of "7" anti-escape nets, and in the net foot bar small The ditch makes the snail look out of the water. Or use snails to strongly evade response to 3V AC, DC or 10V pulsed electrical stimulation. Fences are made along the ground with bare conductors around the rearing area, with 6V AC and DC power supplies or 15V pulses connected across the conductors. generator. Or sprinkle a 10cm barrier with stone powder around the feed, which also has better anti-escape effect, but the lime should be filled after being washed by rain. Fourth, shading in the field around the planting of trees or high-stem crops such as sunflower, or planted scaffolding of pumpkin, loofah, beans, can also use firewood or shading nets set up shade. Fifth, daily feeding and management 1. Keep the breeding ground moist, but not water. Droughts are watered 1-2 times a day, and firewood is covered on the free floor to keep the ground moist. Pay attention to drainage during the rainy season. 2, to prevent natural enemies. The ants can use water ditch irrigation (better water on the water) to block or fish, shrimp, sugar, bones, etc. Rats can use knife drugs or mice or cats to deal with. Ukrainian species can be tied on high stalk crops and driven off with ring tones. 6. Timely Harvest When the density of the breeding area is too large, timely harvesting of the individual's larger snails; when the temperature drops to 15°C before the winter comes, all snails must be harvested in time, the size is separated, and small snails are added indoors. Warm aquaculture or concentrate wintering. After harvesting, it is also possible to plant seasonal vegetables in the farm in winter.

We offer full set Seed Processing Line solution. Whole seed processing line is from pre-cleaning, fine cleaning, destining, gravity separating, bean polishing, to seed coating, until seed weighing and packing.

 

The grain seed processing line is composed of several single machines. Base on different grain type and processing aim, we will suggest appropriate grain cleaning machines. These grain cleaning machines are collocated freely. Between each machines, there are Bucket Elevator , slope elevator or other conveying equipment to link up.

 

Seed processing line has following advantages:

 

Easy to setup, machines easy to move and can be placed freely.

Save labor, there are middle conveyors to transfer grain from one machine to another.

Effective and low cost, single machines compose a seed processing line improve the working performance. Low production cost makes it hot sale.

 

Above flexibility and convenience makes seed processing line makes it becoming hot sales item.

 

Seed processing line installation effect and introduction.

 

This seed processing line is composed of 5XZC-5DH seed cleaner & grader, 5XZ-5B Gravity Separator , DTY bucket elevator, 5BY-5B Seed Coating Machine, and DCS-50B Bagging Scale System.

 

Working flow: The seeds are fed into 5XZC-5DH seed cleaner & grader first. Seed cleaner & grader will remove the dust, light impurity, oversize and undersize impurity before seed flow into 5XZ-5B gravity separator. During seeds cleaned in gravity separator, the seeds are separated by density difference. The partially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldy seeds are separated from good healthy seeds. Then seeds go on being lifted by Dty Bucket Elevator, falling into the 5BY-5B seed coating machine. During the seed coating procedure, the chemical, fertilizer or other protective liquidity will be coated to seeds' surface and improve seeds' germination rate. Finally seeds being transferred to Weighing Scale . Seeds will be weighted and packed to bags ready for sell.

One seed processing line includes several seed processing machines. It can be composed of different single machines freely. Base on client's particular cleaning aim, we will offer customized seed processing line. It is featured of simple operation, flexible and cost effectively.

 

Following is one simple seed processing line case show

 

This Seed Cleaning Line is 5 ton per hour capacity. And it consists of 5XZC-5DH seed cleaner & grader, Slope Elevator , 5XZ-5 gravity separator, and 5XQS-5 destoner.

 

Working flow:

 

Raw material is fed from seed cleaner & grader bucket elevator hopper. Then bucket elevator transfer raw material to air screen cleaner to remove the light impurity. The dust, straw, husk are removed here by air suction and collected by cyclone. Then raw material fall into sieve trunk. The sieve trunk has several layers. Each layer installed different hole size sieves. These sieves will grade raw material by size. So the oversize impurity, undersize impurity are removed. Seeds from seed cleaner outlet box are received by first slope elevator. This slope elevator transfer seeds to gravity separator. On the gravity table, the immature, eaten, sicken, moldy, shrink seeds are separated from good seeds. As the gravity separator will separated seeds to 3 parts: impurity, mixing seeds, good seeds. The mixing seeds are received by this first slope elevator too. It will take the mixing grain for reflow. The good seeds are being transferred by second slope elevator to the destoner. The destoner will separate the stones, heavy impurity out. Finally you get clean grain from the destoner good grain outlet box.

Seed Processing Line

Seed Processing Line,Seed Cleaning Line,Grain Cleaning Line,Sprout Processing Line

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , http://www.seedgraincleaner.com