First, the product introduction:
ZWL-08A is a newly developed digital intelligent centrifuge of our company. It is a routine laboratory centrifuge. It is widely used in research, education and production departments of biology, chemistry, medicine, etc. Its high speed is 4000 rpm, which is suitable for radiation. Immune identification and isolation of cells and large particles. The centrifugal machine generates centrifugal force by rotating at a certain speed, so that the liquid test object in the centrifuge tube is separated and precipitated according to the particle size and mass under the action of centrifugal force, and the test purpose is achieved. The centrifuge user can set the speed and save, the microcomputer automatically constant speed, the microcomputer sets the time, and the travel time is accurate.
Second, technical parameters:
Zui high speed: 4000 rev / min,
Timing range: 0-60 minutes,
Working capacity: 15ml*6
Power: 90W,
Zui large centrifugal force: ≥1795g,
Machine noise: ≤70dB,
Working power: 220V50HZ.
Third, before use:
1. Read this manual carefully before use.
2. The working environment temperature of the centrifuge is 5-40 ° C, the relative humidity should not exceed 80%, and there is no conductive dust, explosive gas and corrosive gas.
3, the workbench should be level and stable to prevent vibration, the work room should be clean and tidy, dry and well ventilated.
4. Wipe the inner cavity and rotor before cleaning.
5. Before work, evenly put an empty centrifuge tube and let the machine run at high speed for 1-2 minutes. No abnormality can be used for normal work.
Fourth, the use of instructions:
1. Prepare for the "pre-use instructions".
2. Put the tube with the same weight and fit into the centrifuge hole and close the centrifuge lid.
3. Turn on the power and press the “on/off†button to turn on the machine.
4. Press the up or down button on the speed digital tube to set the desired speed. The range is 1000 rpm/4000 rpm. The button changes 100 rpm once. It is automatically saved after setting to facilitate long-term speed. use.
5. Press the up or down button below the digital tube to set the required time. The range is 0-120 minutes. The button changes once for 1 minute. The set time is not saved. After power-on, it is automatically at 0 (ie OFF).
6. After the setting is completed, press the start button to start working. If you need to exit midway, please press the pause button to power off first, and do not directly power off.
7. After the work is finished, turn off the power and clean the whole machine.
ZWL-08A is a newly developed digital intelligent centrifuge of our company. It is a routine laboratory centrifuge. It is widely used in research, education and production departments of biology, chemistry, medicine, etc. Its high speed is 4000 rpm, which is suitable for radiation. Immune identification and isolation of cells and large particles. The centrifugal machine generates centrifugal force by rotating at a certain speed, so that the liquid test object in the centrifuge tube is separated and precipitated according to the particle size and mass under the action of centrifugal force, and the test purpose is achieved. The centrifuge user can set the speed and save, the microcomputer automatically constant speed, the microcomputer sets the time, and the travel time is accurate.
Second, technical parameters:
Zui high speed: 4000 rev / min,
Timing range: 0-60 minutes,
Working capacity: 15ml*6
Power: 90W,
Zui large centrifugal force: ≥1795g,
Machine noise: ≤70dB,
Working power: 220V50HZ.
Third, before use:
1. Read this manual carefully before use.
2. The working environment temperature of the centrifuge is 5-40 ° C, the relative humidity should not exceed 80%, and there is no conductive dust, explosive gas and corrosive gas.
3, the workbench should be level and stable to prevent vibration, the work room should be clean and tidy, dry and well ventilated.
4. Wipe the inner cavity and rotor before cleaning.
5. Before work, evenly put an empty centrifuge tube and let the machine run at high speed for 1-2 minutes. No abnormality can be used for normal work.
Fourth, the use of instructions:
1. Prepare for the "pre-use instructions".
2. Put the tube with the same weight and fit into the centrifuge hole and close the centrifuge lid.
3. Turn on the power and press the “on/off†button to turn on the machine.
4. Press the up or down button on the speed digital tube to set the desired speed. The range is 1000 rpm/4000 rpm. The button changes 100 rpm once. It is automatically saved after setting to facilitate long-term speed. use.
5. Press the up or down button below the digital tube to set the required time. The range is 0-120 minutes. The button changes once for 1 minute. The set time is not saved. After power-on, it is automatically at 0 (ie OFF).
6. After the setting is completed, press the start button to start working. If you need to exit midway, please press the pause button to power off first, and do not directly power off.
7. After the work is finished, turn off the power and clean the whole machine.
We will continue to try new flavors to enrich our products, and we will insist on the taste of nature. As we all know, some people like apple flavor, some people like orange flavor, some people like cola flavor, so we have developed a popular taste - Citrus Flavor E-cigarette, because its fragrance is simply It's fascinating, we value this kind of taste, and similarly, it has a lot of pleasant qualities, and it won't hurt people.
Substitute For Smoking,Citrus Flavor E-Cigarette,Citrus Cigarette Alternative,Citrus Cigarette Heatsticks
Dongguan Vanilla Bioengineering Co., Ltd. , https://www.healthecigarette.de